EndedChatGPTLast seen Nov 4, 2026
Prompt not recorded for this ad
Sponsored

Ellis Manufacturing Company Inc.Sponsored
U-Head for Light Duty Steel Shore
The Ellis U-Head Top or shore saddle for Light Duty Steel Shores is designed to fit on all Light Duty Shores and secure to a horizontal 2x4, 2x6, 2x8, 4x4, 4x6, 4x8, 6x6 etc. lumber beam and joists. Joist stabilization. Specifications The Ellis U-Head Top or shore saddle for Light Duty Steel Shores is compatible with all Light Duty Steel Shores. See below for specifications on all U-Head Tops. Specifications ** FOR USE WITH LIGHT DUTY STEEL SHORES ONLY (with Ellis Thrust Bearings and without) Single Joist Holder | STL-JH Double Joist Holder | STL-JHD Triple Joist Holder | STL-JHT Quad Joist Holder | STL-JHQ 4x4 Beam Holder | STL-4x4 6x6 Beam Holder | STL-6x6
Across all of Ellis Manufacturing Company Inc.'s ChatGPT ads, most appearances first. Prompts aren't recorded per ad yet.

Ellis Manufacturing Company Inc.Sponsored
Joist Holder
Ellis Manufacturing Co. Joist Holders are the best way to secure 4x4 or 6x6 nominal posts to 2x joists. Ellis Joist Holders come accommodate single 2x joists, double 2x joists, or triple 2x joists. Stabilize joists. Specifications Excellent when used to secure 4x4 or 6x6 post to joist in crawl space under houses. "U" shaped bracket on top fits any 2x joist / beam to create extreme lateral support. Square tube on bottom allows 4x4 or 6x6 shore lumber to fit securely. Use 1" screws to secure through any of 12 screw holes. If you are looking to support 4x4 or 4x6 beams see the Ellis Manufacturing Beam Holder. Specifications Below are detailed diagrams of each Ellis Joist Holder or "saddle" and a detailed drawing of each Joist Holder in use. All "in use" drawings show the use of Ellis 4x4 Screw Jacks or Ellis 6x6 Screw Jacks. Joist Holder (JH-4) Double Joist Holder 4x4 (JHD-4) Triple Joist Holder 4x4 (JHT-4) Joist Holder 6x6 (JH-6) Double Joist Holder 6x6 (JHD-6) Triple Joist Holder 6x6 (JHT-6) Shop Drawings and CAD Blocks: Item Number Shop Drawing (.PDF) AutoCAD Block (.DWG) JHQ-4 JHQ-4 Shop Drawing Coming Soon JHQ-6 JHQ-6 Shop Drawing Coming Soon

Ellis Manufacturing Company Inc.Sponsored
Flat Head/Base for Timber Nominal Posts
Engineered for maximum stability, the Ellis Flat Plate Top/Base provides a rock-solid foundation or cap for your nominal 4x4 and 6x6 lumber posts. Manufactured from high-strength steel, each top features a robust thickness to handle demanding structural loads with ease. Specifications The Ellis Flat Plate Top/Base for Timber Shores is available for 4x4 and 6x6 nominal dressed lumber posts. It come with 4 mounting holes for maximum support. Welded for strength and baked on powder coat for durability and longevity. Specifications FH-4 Plate Thickness: 3/8" Plate size: 6" X 6" Plate Mounting Holes: (4) 9/16" Diameter Holes. Fits 4x4 Nominal Post FH-6 Plate Thickness: 1/2" Plate size: 8" X 8" Plate Mounting Holes: (4) 9/16" Diameter Holes Fits 6x6 Nominal Post

Ellis Manufacturing Company Inc.Sponsored
Base Plate Extension
Extend the standard base or top plate of any Light Duty Steel Shore, Heavy Duty Steel Shore, Mini Jack, or 4x4/6x6 Screw Jack with the Base Plate Extension. Hot rolled steel plate with matching mounting holes, relieved corners and baked on powder coat finish. Includes 4 ea. 5/16" diameter x 1" long bolts and matching nuts to bolt plate to top or bottom of steel shores. Specifications Extend the standard base or top plate of any Light Duty or Heavy Duty Steel Shore, Mini Jack, Screw Jack or Timber Jacks with the Base Plate Extension. Hot rolled steel plate with matching mounting holes, relieved corners and baked on powder coat finish. Includes 4 ea. 5/16" diameter x 1" long bolts and matching nuts to bolt plate to top or bottom of steel shores. Base plates are designed to spread load over soil surface. Available Sizes : 12" x 12" x .25" 18" x 18" x .25" Custom Sizes Available *Mounting holes match Light Duty Shores or Heavy Duty Shores. Slots match Mini Jacks, 4x4/6x6 Screw Jacks and Timber Jacks. *Bolts protrude below base plate if used. Shop Drawings and CAD Blocks: Item Number Shop Drawing (.PDF) BASE-12 BASE-12 Shop Drawing BASE-18 BASE-18 Shop Drawing

Ellis Manufacturing Company Inc.Sponsored
Pivoting Top For Light Duty Steel Shores
The Pivoting Flat Plate Top is intended to secure the Ellis Light Duty Steel Shore to the beam being supported and will pivot up to 45 degrees. Specifications The Ellis Pivoting Flat Plate Top for Light Duty Steel Shores is perfect for supporting loads that are at an angle. It comes with 4 mounting holes and a 3/8" thickness for maximum support. It will pivot a maximum of 45 degrees in 2 directions. Specifications FOR USE WITH LIGHT DUTY STEEL SHORES ONLY (with Ellis Thrust Bearings and without) Plate Thickness: 3/8" Plate size: 6" X 6" Plate Mounting Holes: (4) 3/8" Diameter Holes. Range of Pivot: 45 degrees *Adding a pivoting top to a Steel Shore can significantly reduce its Safe Load Rating. Consult with a Professional Engineer for proper use. Product Drawings STL-PCFP STL-PCA44 STL-PCB44
See every ad you and competitors like Ellis Manufacturing Company Inc. run in ChatGPT and Google AI Overviews, and the prompts that trigger them.
Data from Writesonic's ChatGPT and Google AI Overviews ad tracking, updated daily. How we collect it ↗ · Request a correction ↗