EndedChatGPTLast seen Aug 16, 2026
need fiber to ethernet converter with poe output for connecting ip cameras security system
Sponsored

Flytec ComputersSponsored
Ubiquiti ETH-SP-G2 Ethernet Surge Protector Gen2 for Outdoor Gigabit PoE Networks
Ubiquiti ETH-SP-G2 Ethernet Surge Protector Gen2 for Outdoor PoE Networks The Ubiquiti ETH-SP-G2 is a compact Ethernet surge protector designed to help protect outdoor network devices from damaging electrostatic discharge (ESD) and surge events. Built for outdoor Ethernet, PoE, WISP, airMAX, UISP, IP camera, and remote network installations, it adds an extra layer of protection between exposed equipment and the indoor network. The ETH-SP-G2 supports 10/100/1000 Mbps Gigabit Ethernet connections and is engineered for both PoE and non-PoE devices. With two passive, surge-protected RJ45 female connectors, it is easy to install inline between outdoor equipment and network infrastructure. For best protection in outdoor deployments, Ubiquiti recommends installing surge protection near the outdoor device and again near the building entry point, with proper grounding. This helps reduce the risk of ESD and surge damage reaching switches, routers, gateways, injectors, or other network hardware inside the building. Key Features Ethernet surge protector for outdoor network installations ; Protects PoE and non-PoE Ethernet devices ; Supports 10/100/1000 Mbps Gigabit Ethernet networks ; 2 x RJ45 female connectors ; Designed for Ubiquiti airMAX, UISP, WISP, and outdoor PoE deployments ; Helps protect against ESD and surge events ; 10kA+ discharge current rating ; IPX5 weather-resistant enclosure ; Compact wall or pole-mountable design ; Fast plug-and-play installation with proper grounding ; Outdoor Ethernet and PoE Protection Outdoor Ethernet runs are exposed to electrical surges, static discharge, and nearby lightning-related events. The ETH-SP-G2 is designed to absorb and discharge surge energy safely to ground, helping protect connected radios, cameras, switches, routers, and PoE equipment. Ideal for WISP and airMAX Installations The ETH-SP-G2 is commonly used in WISP customer-premises installations, airMAX links, outdoor access point deployments, and building entry points. It is especially useful when Ethernet cabling runs outdoors or connects equipment mounted on poles, towers, rooftops, or exterior walls. Simple Inline Installation Installation is straightforward: mount the ETH-SP-G2 near the protected device or cable entry point, connect the Ethernet cables, and properly ground the unit. Without grounding, surge protection is mostly decorative optimism, and the universe does not reward that. Ideal Applications Outdoor PoE access points ; Ubiquiti airMAX and UISP deployments ; WISP customer installations ; IP camera and surveillance networks ; Building entry Ethernet protection ; Rooftop, pole, and tower-mounted devices ; Gigabit Ethernet surge protection ; Technical Specifications Hardware Product Model: ETH-SP-G2 ; Product Type: Ethernet surge protector ; Enclosure Material: Polycarbonate ; Weatherproofing: IPX5 ; Dimensions: 91 x 61 x 32.5 mm (3.6 x 2.4 x 1.3') ; Weight: 80 g (2.8 oz) ; ; Networking Network Interfaces: 2 x RJ45 female connectors ; Supported Ethernet Speeds: 10/100/1000 Mbps ; PoE Compatibility: Supports PoE and non-PoE Ethernet devices ; ; Surge Protection DC Spark-Over Voltage: 90V @ 100V/s ; Maximum Impulse Spark-Over Voltage: 700V @ 1kV/s ; Discharge Current: 10kA+ ; Maximum Insulation Resistance: 1GO @ 50V ; Maximum Capacitance: 1.0pF @ 1MHz ; ; Environmental Operating Temperature: -30C to 65C (-22F to 149F) ; Operating Humidity: 10% to 90% non-condensing ; ; Installation Installation Type: Inline Ethernet surge protection ; Mounting: Wall, pole, or grounded installation point ; Grounding: Proper grounding required for surge protection ; ;
Across all of Flytec Computers's ChatGPTads, most appearances first. Prompts aren't recorded per ad yet.

Flytec Computers IncSponsored
Tycon Power All Stainless Heavy Duty Worm Gear Hose Clamp
SKU: 5700018 - All Stainless Heavy Duty Worm Gear Hose Clamp. 2 to 6in adjust range. 0.56in wide. 5/16in Slotted Hex DriveThe 5700018 worm gear drive hose clamps are a heavy duty hose clamp made entirely from stainless steel which provides for unsurpassed reliability and longevity in outdoor applications. The wide adjustment range from 6" to less than 2" allow for one hose clamp to be used in a wide variety of applications. Installers and mechanics only need to stock one hose clamp and always have the correct hose clamp for the job at hand.Features All Stainless Steel for higher reliability; Wide Adjustment Range 6" to 2"; Worm Gear with 5/16" Slotted Drive; Heavy Duty: 0.024" Thick Band, 9/16" Width; Meets SAEJ1508 Specification; Applications Antenna Mounting; Enclosure Mounting; Marine Applications; Farm Applications; Technical Description Specifications The worm gear drive hose clamps are a heavy duty hose clamp made entirely from stainless steel ; which provides for unsurpassed reliability and longevity in outdoor applications.; The wide adjustment range from 6 in. to less than 2 in. allow for one hose clamp to be used in a wide variety of applications. ; Installers and mechanics only need to stock one hose clamp and always have the correct hose clamp for the job at hand.; Features. Materials - Stainless Steel. Adjustment Range 2 in. to 6 in.Worm Gear Drive 516 in. Slotted Hex Drive.; Band Width - 916 in.. Band Thickness - 0.024 in.; Materials - Stainless Steel; Adjustment Range 2 in. to 6 in.; Band Width - 9/16 in.; Band Thickness - 0.024 in.; ;

Flytec Computers IncSponsored
Ubiquiti U-Cable-Patch-8M-BK 8M Cat6 RJ45 Patch Cable Ultra-Thin 3mm PoE+++ Support
Ubiquiti U-Cable-Patch-8M-RJ45-BK UniFi Patch Cable Ultra-thin patch cable with GbE support and flexible, bendable boots for enhanced installation versatility. Key Features Bendable booted RJ45 ; 3 mm outer diameter ; Cable length: 0.1 to 8 m ; Color: Black ; Technical Description Available Lengths: 0.1, 0.3, 1, 2, 3, 5, 8 m (0.3, 1, 3.3, 6.6, 9.9, 16.4, 26.3 ft) ; Connector: (2) Bendable booted RJ45 ; Operating Environment: Indoor ; Supported PoE Type: Up to PoE+++ ; Available Colors: White, blue, black ; Cable: Jacket Diameter: 3 mm (0.1') ; ; Standards: TIA-568-B.2 ;

Flytec ComputersSponsored
Ubiquiti PoE++ Adapter Injector 60W 48V 1.25A
U-PoE++ - PoE++ Adapter (60W)The U-PoE++ Adapter is a versatile and reliable power solution, designed to support high-power PoE++ devices, ensuring seamless performance and connectivity in various applications.The U-PoE++ Adapter is a powerful and reliable adapter designed to supply up to 60W of PoE++ power, making it ideal for UniFi PoE++ devices, such as the UA Hub and G4 PTZ, as well as other PoE++ enabled devices. This adapter is perfect for wireless mesh applications and helps offload PoE switch power dependencies.Features High Power Delivery: Delivers up to 60W of PoE++ power, providing sufficient power for high-demand devices.; Wide Compatibility: Suitable for various UniFi PoE++ devices, enhancing their performance and reliability.; Robust Protection: Equipped with surge, peak pulse, and overcurrent protection to ensure safe and stable operation.; Comprehensive Connectivity: Includes RJ45 data input, an AC cable with earth ground, and PoE++ output.; Status Monitoring: Features an LED indicator for easy status monitoring.; Applications The U-PoE++ Adapter is ideal for powering wireless mesh applications, as well as providing additional power to devices like the UA Hub, G4 PTZ, and other PoE++ devices, thus reducing dependency on PoE switches.; Dimensions: 106 x 63 x 34 mm (4.2 x 2.5 x 1.3'); Weight: 210 g (7.4 oz); Technical Description Specifications: Model: U-PoE++; Output Voltage: 48V DC @ 1.25A; LAN Activity Indicator: No; Gigabit LAN Port: Yes; Remote Reset Capability: No; Reset Button: No; Rated Voltage: 100240V AC @ 50/60Hz; Input Current: 1.3A @ 120V AC; 0.75A @ 230V AC; ; Inrush Current: <100A peak @ 120V AC; <200A peak @ 230V AC; ; Efficiency: 85+%; Output Ripple: 1% max.; Switching Frequency: 65 kHz; Line Regulation: = 1%; Load Regulation: = 3%; 2-Pair Powering: No; 4-Pair Powering: Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-); AC Connector: IEC-320 C6; Data In / PoE: RJ45 shielded socket; Surge Protection: Difference and common mode; Clamping Protection: 11V data, 60V power; Max. Surge Discharge: 1500A (8/20 s) power; Peak Pulse Current: 36A (10/1000 s) data; Shunt Capacitance: <5 pF data; Response Time: <1 ns; Power Method: Universal AC input, 100240V AC, 50/60 Hz; Power Supply: AC/DC; Supported Voltage Range: 100240V AC; Max. PoE+ Wattage Per Port by PSE: 60W; Ambient Operating Temperature: 0 to 40 C (32 to 104 F); Storage Temperature: -30 to 70C (-22 to 158 F); Ambient Operating Humidity: 10 to 95% noncondensing; Certifications: CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS; ;

Flytec ComputersSponsored
Ubiquiti UACC-AE Active Ethernet Fiber-to-Copper Media Module 1Gbps SFP/RJ45 PoE
Ubiquiti UACC-AE Active EthernetA fiber-to-copper media module that allows wireless equipment without SFP ports to support fiber uplinks up to 1 Gbps.Key Features Fiber connectivity to any PoE device; Wall mount; 1Gbps SFP por; GbE RJ45 port and 24V PoE in; Status LEDs; Technical Specifications Mechanical Dimensions: 76.5 x 76.5 x 26.8 mm (3 x 3 x 1'); Weight: 70 g (2.4 oz); Enclosure material: UV-stabilized polycarbonate (PC110U); ; Hardware Networking interface: (1) 1 Gbps SFP Port; (1) GbE RJ45 port; ; Power method: PoE (Pins 1, 2+; 3, 6-); Passive PoE, 24V (Pins 4, 5+; 7, 8-); ; Power supply: UniFi PoE switch; Max. power consumption: 1.5W; Supported voltage range: 1657V; Ambient operating temperature: -40 to 60 C (-40 to 140 F); Ambient operating humidity: 10 to 90% noncondensing; Certifications: CE, FCC, IC; ; LEDs Status: (1) Signal LEDs; Steady white:power on; ; Ethernet: Blinking blue: activity; ;
See every ad you and competitors like Flytec Computers Inc run in ChatGPT and Google AI Overviews, and the prompts that trigger them.
Data from Writesonic's ChatGPT and Google AI Overviews ad tracking, updated daily. How we collect it ↗ · Request a correction ↗